Boiler Feed Pumps in Bangalore, India

Mieco India was the one of the top most manufacturing company of Boiler Feed Pumps in Bangalore, India. We are manufacturers of boiler feed pumps in India.These pumps go through a highly sophisticated process compared to the conventional casting process.

Steam locomotives and steam engines used in ships and stationary applications, such as power plants, also require feed water pumps. In this situation, however, the pump was often fed with a small steam engine that operated with the steam produced by the boiler. certainly, a means had to be provided for putting the initial charge of water into the boiler,  before steam power was available to run the steam-fed water pump. The pump was often a positive displacement pump that had valves and steam cylinders at one end and feed water cylinders at the other end.

The pumps are classified into two sections: Vertical pumps and horizontal pumps.In India there are many manufacturers of pumps and generators, suppliers and exporters are there.Mieco has made great progress and has made its first lead in the leadership position.Mieco provides best Boiler Feed Pumps in Bangalore, India. Our company has grown to encompass three pump ranges offering more than 70 models for specific standard applications.

MiecoIndia is one of the best manufacturers, suppliers and exporters of

Plunger pumps at affordable prices!   

Click here to get an additional info on 

 Boiler Feed Pumps in Bangalore, India

Call Now: 080-22239173,+91 9845324047   

Send a mail: info@miecoindia.in

Boiler feed pumps manufacturers

 Boiler feed pumps manufacturers

Multi-stage and high-speed boiler feed pumps manufacturers are the preferred type because of their ability to deliver large amounts of water and provide it at constant flow avoiding shock loads on pipes and valves.

Materials

• Nozzle plate - Sliding resistant steel
• Stainless steel sheets
• Bearings-White metalled (lubricated oil)
• Turbine Glands- Carbon
• Turbine cover- Cast steel
• Turbine Wheel - Stainless Steel
• Shaft - Nickel Chrome steel
• Wear Rings- Lead Bronze
• Impeller-Stainless steel or monel
• Diffuser Ring - Aluminum Bronze

The Curtis wheel boost (compound speed) rotates at speeds of around 7000 rpm. Speed compression means that there is very little pressure drop across the stages reducing the need for fine gaps. This allows the turbine to run quickly from the cold.

The balance chamber should have a larger diameter than the suction wear ring. If the pump is designed to be supercavitant, hard metal inductors are installed and screwed into the water. Any cavitation occurs in this which becomes sacrificial. Inlet steam pressure around 60 bar, outlet around 3 bar. The downward expansion at lower pressures would require excessively large envelopes and would lead to problems of centrifugal stress due to the larger blade required.

Carbon seals are used instead of labyrinths for simplicity and to keep the length of the unit to a minimum. Due to the different coefficients of expansion between carbon and steel, a madrill must be used to establish the correct set. For Boiler feed pumps manufacturers ,an additional end bearing and, therefore, an additional gland is required. The pump is dynamically balanced by the leakage of the balance chamber to the suction eye and the edges of the dam at the rear of the impeller.

For further Details about Mieco contact the below address:

Address for boiler feed pumps manufacturers: 

Enquiry  :  https://goo.gl/NwBbp4

Mieco Pumps and Generators Pvt Ltd

#162, Sadar Patrappa[SP] Road, Bangalore- 560 002

Mobile: +91 9845324047

Email:info@miecoindia.in

Website: http://www.miecoindia.in/