Screw Pump

What is screw pump?

A screw pump is a pump that uses one or more screws to move fluids or solids along with the screw axis. In simple words, a single screw rotates in a cylindrical cavity, thereby moving the fluid or solid material along the screw's spindle. The spindle is responsible for the pumping action of the pump.

Screw pumps are generally made from traditional low-carbon steel (mild steel) with a special epoxy coating. An appropriate coating system is selected for each specific application.

Types of screw pumps

Screw pumps are of three types:

• Single screw pump
• Two screw pump
• Three screw pump

Single screw pump

A single screw pump contains a single pumping element called screw. This screw rotates within a stationary elastomeric stator.

The interference fit between the screw and the flexible stator create a unique pump design that can handle a variety of fluids, including high levels of solids and variable viscosities. A single screw pump is also known as progressive cavity pump or eccentric screw.

Two screw pump

The two screw pumps are operated using two intermeshing screws rotating within a stationary bore that is shaped like a figure eight. These pumps are also known as double screw pumps or twin screw pumps. The two screw pumps are used mainly to pump fresh water, mineral water and sea water with petroleum products admixture. These pumps are also used to pump viscous liquids and fuel oil. The rotor and housing are metal and the pumping element is supported by the bearings in this design.

Three screw pump

Like the two screw pump, the three screw pump also operates on the same principle of intermeshing screws. The three screw pump utilizes a centrally located primary screw, which intermeshes with two secondary screws to create pressure and move fluid.

The idler rotors are located 180 degrees from each other, are suspended within the pump and do not penetrate the housing. The power rotor pass into the housing and requires one seal and one bearing; there may be bushings/sleeve bearings that are exposed to the pumped fluid.

Screw pump applications

• Fuel transfer
• Elevators
• Storm water pumping
• Drainage pumping
• To move industrial waste water

Advantages of screw pumps

• High reliability
• Simple and rugged design
• The open structure and slow rotation speed makes it a heavy duty pump.
• A typical screw pump has a lifetime of between 20-40 years.
• A screw pump can operate even when there is no water in the inlet. So it is not necessary to install expensive measures to prevent dry running. 
• A screw pump requires very less maintenance as compared to other pumps.
• High efficiency

Screw pumps at Mieco Pumps and Generators Pvt.Ltd.  

Mieco offers screw pumps in Bangalore at reasonable prices. Screw pumps can be offered with Augers / Hoppers which is widely used for viscous liquids.

Mieco has a wide range of clients from all industrial sectors including barrel pump, electric barrel pump, barrel transfer pump, electric transfer pump particularly designed and engineered to meet the needs of highly productive industries.

Chemical Pump

What is a chemical pump?

Chemical pump is a device used to transfer, pump or store chemicals. These pumps are designed and constructed to handle substances with varying levels of corrosiveness, viscosity, abrasiveness. The chemical pumps is made with anti-corrosion materials.

Chemical pumps can be either a positive displacement pump or centrifugal pump depending on the specific application. The chemical pump is used as any type of pump.

Some chemical pumps are made to handle less corrosive chemicals such as oils or cosmetic products whereas others are made to pump the types of dangerous and volatile chemicals.

If you need to pump oil, salt water, bleach, coatings, acids or any other type of chemical, it's probably necessary to have chemical pump that is specifically equipped to handle particular substance that you are dealing with.

Types of Chemical pumps

Chemical pumps are mainly classified into two types:

• Drum pumps
• Magnetic drive pumps

Drum pumps

A drum pump permits you to transfer chemicals from a 200 liter drum.

Magnetic drive pumps

The magnetic drive pumps are used for transferring aggressive and corrosive chemicals. These pumps are operated by using centrifugal forces to generate velocity, allowing you to move hazardous chemicals without the fear of leaks.

Mieco chemical pumps

Mieco Pumps and Generators Pvt Ltd offers chemical pumps in variety of designs. Chemical pumps are made from materials of constructions like Teflon, PP, UHMWPE, SS etc and also with FRP coating if required. Our chemical pumps can handle aggressive media including slurries and we will offer a pump for a media having high temperature.

Vertical chemical pumps are offered that has found its usage in battery producing industries. 

Mieco Pumps and Generators Pvt Ltd offers a wide range of chemical processing pumps, chemical dosing pumps, and even seal-less magnetic chemical pumps from less than 1/4 hp to customized industrial and commercial applications. Magnetic chemical pumps require a very low transfer at a very small head and these pumps can be used in laboratories and many other industries.

Website: www.miecoindia.in

Email: info@miecoindia.in

Phone: 080-22239173

Mobile number: 9845324047

Vacuum Pumps in bangalore

 Vacuum Pumps in Bangalore

Vacuum pumps  are used in many industrial and scientific operations, including composite plastic molding processes, production of most types of electric lamps, vacuum tubes and CRTs where the device is evacuated or refilled with a specific gas Or gas mixture, semiconductor processing, in particular ion implantation, dry etching and PVD, ALD, PECVD and CVD deposition and so on in photo lithography, electron microscopy, medical processes requiring suction, uranium enrichment, such medical applications Such as radiotherapy, radio surgery and radio pharmacy, analytical instrumentation to analyze gas, Liquids, solids, surface and bio materials, mass spectrometers to create a high vacuum between the ion source and detector, vacuum coating on glass, metal and plastics for decoration , Durability and energy saving, such as low emissivity glass, hard coating for motor components , ophthalmic coating, milking machines and other equipment in dairy sheds, vacuum impregnation of porous products such as coils of Wood or electric motor, air conditioning service (removal of all system contaminants before loading with refrigerant), Trash Compactor, vacuum engineering, sewerage systems

The vacuum pumps can be used to power or provide assistance to mechanical devices. In hybrid motor vehicles and diesel engines, a pump installed in the engine (generally in the camshaft) is used to produce a vacuum. In gasoline engines, however, vacuum is typically obtained as a side effect of engine operation and flow restriction created by the throttle plate, but can also be supplemented by an electrically operated vacuum pump to increase braking assistance Or improve fuel consumption. This vacuum can be used to power the following engine components: vacuum servo motor for hydraulic brakes, motors that move dampers in the ventilation system, throttle control servo mechanism, door locks or trunk release.
In an aircraft, the vacuum source is often used to power gyroscopes in the various flight instruments. To avoid complete loss of instrumentation in the event of an electrical failure, the instrument panel is deliberately designed with certain instruments powered by electricity and other instruments powered by the vacuum source. 

To buy water pumps from best Vacuum Pumps in Bangalore visit our site: http://www.miecoindia.in/

For any query Email us: info@miecoindia.in

Contact us: +91 9845324047

Boiler feed pumps manufacturers

Boiler feed pumps manufacturers

A boiler feed water pump is a specific type of pump used to pump feed water into a steam boiler. The water may be freshly supplied or the condensate produced as a result of the condensation of the steam produced by the boiler. These pumps are normally high pressure units that take suction from a condensate return system and can be of the centrifugal or positive displacement type of pump. Cooling water pumps vary in size up to many horsepower and the electric motor is often separated from the pump body by some form of mechanical coupling. Large industrial condensate pumps can also serve as a feed water pump. In any case, in order to force the water into the boiler, the pump must generate sufficient pressure to overcome the vapor pressure developed by the boiler. This is usually achieved by the use of a centrifugal pump.

Another common form of boiler feed water pumps operates constantly and is provided with a minimum flow device to stop pump overpressure at low flow rates. The minimum flow normally returns to the tank

Steam locomotives and steam engines used on ships and stationary applications, such as power plants, also require feed water pumps. In this situation, however, the pump was often fed with a small steam engine that operated with the steam produced by the boiler. Of course, a means had to be provided for putting the initial charge of water into the boiler (before steam power was available to run the steam-powered feed water pump). The pump was often a positive displacement pump that had valves and steam cylinders at one end and feed water cylinders at the other end; No crankshaft was required. 

To buy water pumps from best Boiler feed pumps manufacturers  visit our site: http://www.miecoindia.in/

For any query Email us: info@miecoindia.in

Contact us: +91 9845324047

Pump suppliers in Bangalore

Pump suppliers in Bangalore

Mieco is one of the leading pump Manufacturers in Bangalore. Apart from the Manufacturing Division, the Company also has Pump suppliers in Bangalore. The company is located in Bangalore,

Pump suppliers in Bangalore Division of Mieco include vacuum pumps, agricultural pumps, water pump motors, electric metering pumps, centrifugal pumps. The Company also manufactures electric energy-saving motors.

Mieco always represents the best in the quality of the pumps that manufactures its customized products at a competitive cost of input costs. Mieco pump manufacturers in Bangalore aim to fulfill the highest desires of customers, for which, we have dedicated each of our efforts to supply item range of fascination to customers.

Mieco has a well-equipped infrastructure to handle the service, repair any part and assemble various types of large pumps. Understanding the needs and requirements, Mieco strives hard to provide complete customer satisfaction. We at Mieco understand the specific needs of customers better than anyone else. Each product supplied by Mieco is selected by carefully studying the performance of the pumps. Our experience helps the customer select the pump suitable for the desired application in the most efficient and cost-effective way.

Offer a range of items at moderate costs, which add to the comfort of life by saving on physical work, time and vitality or for fun.

• Make our articles comply with the principles of global quality and provide the inconvenience of free execution.

• Receive plans that reinforce timely and competent post-treatment management.

• Constantly advance and increase the value of our articles, if necessary with a specialized joint effort.

Mieco provides the highest level of quality assurance to customers. In Mieco, every part to the pump undergoes rigorous examination in various stages of manufacture and assembly results in the superior quality of pumps.So we can deliver the best to enjoy, And more reliable pumps for your desires.

To buy water pumps from best Pump suppliers in Bangalore visit our site: http://www.miecoindia.in/

For any query Email us: info@miecoindia.in

Contact us: +91 9845324047

Generators dealers in Bangalore

Generators dealers in Bangalore

In India you can choose pumps and Generators in Bangalore, Karnataka State, India. Mieco India is one of the leading generators Dealers in Bangalore, which offers a wide range of ecological noise generators, diesel generators and power generators ranging from 1 KVA to 2000 KVA. These types of generators are for all purposes including Commercial, Industrial, IT Company, Residential, Hospitals, Apartments, Educational Institutions and any other event.

We are a captive energy solutions company that has more than 40 years of experience and experience in the field of electrical industry. We provide end-to-end solution to our esteemed customers. Our services of operation and maintenance, guarantee that the plant obtain maximum productivity and reliability. Mieco India is an ISO certified company: 9001, was put in 1970 by its President Mentor Late Shri. K.N.Goyal.

With years of professional experience and qualified human hand in pumps and generators, Mieco India has several clients in India and abroad who purchased pumps and generators from the Bangalore unit. Our valued customers are from Bangalore, Kolar, Tumkur, Mysore and more in Karnataka, Chennai, Madurai, Coimbatore in Tamilnadu and we almost covered in India. We always offer fully affordable, reliable, high-quality and easy-to-operate diesel generators and power generators for all your energy-related needs. We are professionally supported with your high quality products and have a full service center that will help in any situation and our maintenance team will help you and give you a quick solution for all your needs.

We are happy to serve you where and when you need power, to obtain more information and additional help or clarifications

To Know more Generators Dealers in Bangalore
For any query Email us: info@miecoindia.in
Contact us: +91 9845324047

Water pump motor

Water Pump Motor

Water Pump Motor

 
The compact, lightweight and portable pumps Mieco series are an excellent choice for homeowners, gardeners, boat owners and recreational users.

Agricultural Pumps in Bangalore

 
For general agricultural  watering needs, popular Mieco pumps offer the best opportunities for a good price. These models offer commercial grade components such as silicon carbide seals, vibration dampers, and a fixed-mount cast iron pump casing and impeller.

High Pressure Pumps Bangalore 

 
High pressure pumps requiring high pressure, such as sprinklers and nozzles. These pumps are lightweight and compact, which makes them highly portable. Possible applications include irrigation and fire fighting, as well as pumping long distances.

Chemical Processing Pumps in Bangalore

 
Mieco has been designed for pumping a variety of industrial and agricultural chemicals besides clear water applications Construction and industrial pumps.

To buy Water Pump Motor in Bangalore visit our site: http://www.miecoindia.in/

For any query Email us: info@miecoindia.in

Contact us: +91 9845324047