Boiler Feed Pumps Applications

Boiler Feed Pumps is a specific type of water pumps which is used to pump feed water into a steam boiler. Boiler Feed Pump Water may be freshly supplied or returning condensate produced as a result of the condensation of the steam produced by the boiler. These type of pumps are normally having a high pressure units that takes suction from a condensate return system and it can be centrifugal pump type or positive displacement type.

Boiler Feed Pumps operation range in size up to many electric motor is usually seperated from the pump body by some form of mechanical coupling.  Large industrial condensate pumps can also serve as the feed water pumps. In order  to force the water into the boiler, the pump must generate sufficient pressure to overcome from steam pressure developed by the boiler. This is usually more effective and reliable through the use of centrifugal pump. Another way of feed water pumps  - run constantly, and that are provided with a minimum flow devices to stop over pressuring the pump on low flows. This minimum flow returns to the tank.

Types and Applications of Boiler Feed Pumps

1. Vertical Multistage Centrifugal Boiler Feed Pumps:  

• These Pumps are suitable for liquid transfer water in washing systems
• cooling and air-conditioning systems
• water supply systems
• industrial plants and boiler feeding systems
• water treatment systems
• fire fighting systems

2. Vertical Boiler Feed Pump:

• Suitable for general water supply
• fire-fighting systems
• drinking water supply
• pressure boosting
• washing systems
• boiler feed water
• irrigation and heating
• lubricants, fuels, solvents.

Visit Us at: http://www.miecoindia.in/

How to maintain efficient functioning water pumps

Water pumps are very crucial modern gift that has successfully offered a best solutions for the water pumps across the world. Energy Efficiency Water pumps can be designed as mechanical devices which are used for the displacement of the liquid from one location to another. Water Pumps units are capable of extensive functioning, owing to various technical issues. Let us discuss how to maintain efficient functioning of the water pumps.

Pumps and Generators are leading to energy wastage. When pumps are maintained to restore efficiency close to its original point and significant energy savings can be achieved. Typically, a pump can includes: replacement of wear rings, bearings, seals, cleaning of internals. Pumping is a major expense in farming and even in small savings achieved through pumps maintenance can be noticeable impact in reducing overall energy costs.

Make sure that the pump to drive placement is being done at the operating temperature.

• The rotating parts of the pump needs to be dynamically balanced.
• The pipe pressure should be eliminated at every cost.
• It is imporatnt that you have to ensured that the piping reducers are not installed upside down. This will trap the air inside and ultimately will be entering the pump saturation.
• It is important that the bearing oil is changed regularly.
• It is crucial that the initial adjustment of the impeller should be done at operating temperature of the pump.
• Avoid using hardened shafts.
• Ensure that there is no entry of both the solids and water in the bearing case.
• The pipe hangers should be overlap.

For more visit us at: http://www.miecoindia.in/

A Buyer’s Guide on Pumps Bangalore

Need to buy pumps and generators? Check out our range of water transfer pumps, fire-fighting pumps, trash pumps and generators. So why there are so many pumps and generators to choose from? The fact is there are many different situations in which you might need high pressure pump water and each one pumps and generators comes with various different functionalities and challenges. Whether you are draining a pond or basement or you want to clean larger areas on a farm or from worksite, protect your home from worksite, each of our different water pumps is designed to make your task more easier.Water Pumps are used at homes, construction sites, on farms, emergency services and many more different applications.

What is Water Pumps?

Basically Water Pumps are designed to transfer large amounts of water from one place to another. As time going on some of the leading manufacturers and suppliers have designed extremely efficient, reliable and long durable pumps, so you can fulfill all your requirements and needs.

Mainly Portable Water Pumps includes:

• Electric Powered Pumps
• Petrol or Diesel Powered Pumps

Electric Powered Water Pumps: The is the most common water pump, used in indoor smaller requirements, small garden pumps and rain water tank pumps etc. Most of the pump switch can be plugged into your standard household switch with 12 volt power source. These pumps can be typically designed for smaller domestic tasks, it requires less powerful and less maintenance than petrol or diesel pumps.

Petrol or Diesel Powered Water Pumps: These type of pumps used in large properties, construction, in farming and mining used by professionals with the help of petrol or diesel powered. Petrol or Diesel powered pumps produce carbon monoxide emissions, so they can be widely used in outdoors and it is ideal for irrigation on farm or large properties. These pumps can act like your lawn mower; add fuel and oil, pull the recoil chord and then engine is ready to prime position for pumping.

CLICK HERE for any queries or need any help to decide what type of pumps and generators that suits your all your requirements and needs. 

http://www.miecoindia.in

Induction Motors in Bangalore

Three phase induction phases

For many industrial applications, three phase induction motors are used and these motors are most popular in the market . For choosing this type of motors can have a number of reasons:

• Non-complex construction – these don't require permanent magnets, windings or brushes on the motor.
• These run directly off of the electric distribution grid.
• Low cost.
• Rough and suitable for uncertain environment. 
• Due to not having brushes, they are long lasting and required less maintenance. 

However, the main drawback of 3 phase induction motor is that they have small, load-dependant speed range. Do you know what causes is to be a drawback for induction motors?

Ns= (120*f)/p

Where 'ns' is the synchronous speed

'f' is the supply frequency

'p' is the number of motor poles.

The motor speed will slightly less than the synchronous speed and that will dependent on the motor load. 

For example, for the given motor – if the number of poles is fixed , then the only way to change speed is to change the frequency of the power supply to the motor. This is because the electrical grids run at fixed frequency. Normally “induction motors run at a constant speed” with slight variation in the load changes. 

There are so many methods have been developed for the speed control of AC induction motors but one of the most cost effective one is the ' open loop', 'v/f' control. 

For more visit: http://www.miecoindia.in/

Power Supplies, Energy Efficiency and Emergency Generators

There are two basic methods of connecting an emergency power generators.

• Via pre-wired transfer switch
• Via extension cords

The transfer switch method can be used for both stationary as well as portable generators. Portable generators can be connected through manual transfer switch. The stationary home systems normally use an automatics transfer switch. It automatically insulate your house from grid and stars up the generator when it detects the power outage. 

The transfer switch and wiring both required a licensed electrician and obviously more time consumption. If you caught off-guard by a blackout, then you can use portable genset with extension cords. Today, more than 3 million people in mid-atlatic are still without power after sudden storm, this storm gave impact of a hurricane without any warning. Extension cards can be used only for cord and plug appliances. Portable Generator will be connected with lights and hard-wired appliances not a simple. There are some methods of connecting hard-wired devices, but may require a professional help. 

Here two things to remember:

• Whenever you run generator, it must be insulated from the utility lines.
• The generators can run on only putdoors with exhaust pipe which is located away from house.

To know more visit: http://miecoindia.in/

Contact: +91 98453 24047

Email: info@miecoindia.in

How can I choose pumps and generators ?

There are so many pumps and generators manufacturers and suppliers to choose from? How do I fix my mind to choose best pumps and generators at affordable prices. Mieco India is one of the best manufacturing and supplying company of pumps and generators in Bangalore. We assist you to choose the best pumps and generators for all your requirements and needs.

Buy pumps and generators in confidence that all our products are high quality and long durable. Selecting generators and pumps are endless, so before you can choose a pumps and generators we wish to consider the following:

1. What  size of pump and generator do I require?

All electronics and electrical products have a data plate information regarding their power usage. For most power tools and their listed wattage is all the power they require to run . All house hold items includes central heating pumps, TV's, lights and Video recorders etc are comes under in the same category. 

If you are unsure about power usage of a product has it is always advisable to contact the relevant manufacturers, suppliers and technical department, requesting the start up wattage and running wattage of your item. With this information you can able to determine accurately the size of pumps and generators you require.

2. Do I require a pumps and generatos that has a long run fuel tank?

Pumps and Generators that are available in either run or long run versions. A standard tank will last for 2-4 hours, but long run generators can run through out the night. If you are looking to purchase a pumps and generators back up then we will recommend a long run tank machine for all your needs.

3. What type of sockets do generators can use?

In India, Generators can use white 230V 15A Schuko sockets for long usage. 

Click here to visit us: Pump and Generators 

Vacuum Generators in Bangalore

Mieco India is the leading manufacturer, exporter and supplier of Vacuum Generators in Bangalore, India. Vacuum Generators is for all commercial and industrial applications and we used extracting raw materials to make vacuum generators as final high quality product in the global market. Mieco offers the most compressive products of vacuum pumps and generators for all process applications in the field of plastics processing. 

Our focus is always on providing the most reliable, operational and affordable price solutions to our customers. We offer you a wide selection of new technologies for vacuum generator and pumps generation in the field of plastics processing. Manufacturing and Supplying of Vacuum Pumps and Generators, we have many years of experience, the experts from Mieco will be happy to guide you on our services and based on your requirements they assist you which pumps and generators are required for your need. 

With a wide selection of products available from Mieco, you will find the most technically suitable and cost-effective vacuum pumps and generators whatever the application. Our range of products is for simple applications in the field of handling, to individual degassing systems for extruders supply systems. 

To know more visit: http://miecoindia.in/

Contact: +91 98453 24047

Email: info@miecoindia.in