Vacuum Pumps in Bangalore

Mieco offers new modern Vacuum Pumps in Bangalore. Vacuum Pump is used to remove gas molecules from a sealed volume so that partial vacuum can be separated. The first Vacuum Pumps are preceded  by the suction pump, which is designed with antiquity.

In the 17th century, Vacuum pump is redesigned water pumps with improved versions and measurable vacuum can be produced. Pumps are mainly categorized on the basis of three techniques.

1. Positive Displacement Pumps: These pumps can be used to increase the decay and allows gas to flow  from the chamber. Positive Displacement Pumps insulate the cavity and exhaust it to the atmosphere.

2.Momentum Transfer Pumps: These pumps are also called as molecular pumps. Which is used in high speed jets of heavy fluid and high rotating blades to knock gas molecules out of the chamber.

3.Entrapment Pumps: These pumps are more effective for low vacuums. Where as momentum transfer pumps are conjunction with one or two positive displacement pumps. This is most common high configuration pump used to achieve high vacuums.

For more information visit us at : Mieco Pumps and Generators Pvt Ltd

Maintenance of Chemical Pumps in Bangalore

Suppose you are working inside a chemical factory, you are always prone to hazardous events either it is small or big. These unwanted and hazardous occurrences can be altered or reduced down by several times, when the factory assets and product machine tools are processed under lenses quite regularly. We are talking about chemical pump processing industries, the most import machines employed in such terminals are the chemical pumps.

Since numerous pumps and generators have life span of 15 years or more, this is highly imperative task for pump operators to go for straight Life Cycle Cost(LCC) analysis. This is more helpful while selecting chemical pumps based on lifetime expenses of maintenance, operation, vitality utilization and natural security. For a wide range of chemical pumps and electric motors in Bangalore and pumps and generators working conditions, a process of routine maintenance will helps to develop pump life. 

Here are few points to maintain chemical pumps in every three months including:

• Foundation of the chemical pumps need to be monitored by holding the bolts for tightness purpose.

• Change the pump oil after the initial 200 hours of operation for another pump and after that at regular intervals or 2,000 working hours.

• Re-grease the bearings at regular intervals or 2,000 working hours.

• Regular maintenance is very important and recording the data, comparing that with previous record will helps to come out of possible upcoming failures or short coming of the chemical pumps.

For more information visit us at: Chemical Pumps in Bangalore

Applications of Centrifugal Pumps in Bangalore

In commercial or industrial area, the amount of liquid transferred or circulated in the all the states. From industrial custom fabricators, water treatment facilities, chemical processing plants, to farm operations, the need of liquid is moves as a daily occurrence.  We not only need pumps for daily uses and we also use specialty pumps for emergency purposes such as chemical wash down and fire-fighting. Most of the industries required to have a storage tank, water reservoir or municipal hydrant from which to pump water in case of a fire or spill. Now a days hundred's pf different pumps are coming in a market in that you have purchase the right pump for right applications.

Components of  Centrifugal Pumps: Centrifugal Pumps includes four key  components. Each one component plays a different operation, this to be considered while purchasing pumps for your application.

1. Water Pump Motor:

The water pump motor is the power source for the pump and usually water pump motor determining factor in the gallons per minute(GPM) that a pump can move.  The larger horse power usually correlates to a larger GPM. The most common water pump designs are open drip proof and totally enclosed fan cooled type. Totally enclosed fan cooled motors do not permit outside air freely to circulate through the interior of the and it is cooled by an external fan blowing outside air over the frame of the motor. The design of motor is more expensive and it is widely used in industrial settings because it gives more protection against dirt, weather and moisture.

2. Water Pump Impeller: The style and construction of impeller determines the solid handling capabilities and durability of the water pumps. Water Pump Impeller comes in three designs open impeller, semi-open impeller and closed impeller.

• Open Impeller are found in water pumps that can handle larger solid material but it operate at lower pressures.
• Closed Impeller are more efficient and specially designed for clear liquids and higher pressure applications.

3. Water Pump Volute: The volute water pump is directly contact with the fluid that is being pumped, so the material that is volute is made out of the needs to be considered. These water pumps are constructed with stainless steel or bronze hold up well to corrosive liquids and chemicals. 

4. Water Pump Mechanical Seal: The mechanical seal is a barrier between the pump and the electric motor. When the seal breaks down, you have leakage of fluids into the motor which can totally decease the life of the pump. These pumps are specially designed with the help vi-ton. Vi-ton is very common seal used in industrial grade pumps. 

Visit us at: Centrifugal Pumps in Bangalore

Multistage Boiler Feed Pump Manufacturers

Mieco Pumps and Generators Pvt Ltd is a Multistage Boiler Feed Pump manufacturers in Bangalore. Our range of products are very crucial for any multistage boiler applications. Boiler feed Pumps effectively controls the amount of water supplied to the boiler pumps. These pumps are have accurate shafts of alloy steel engineered to exacting tolerances. By using high quality cast iron and bronze raw material ensures that product long functional life. With the hep hi-tech machines and equipment's , our products are designed in various specifications to cater customer requirements and needs.

A multi-stage boiler feed pumps is a specific type of pump used to feed a water into steam boiler. The water may be freshly supplied or recovering condensate steam produces water to the boiler. These boiler pumps are high pressure units range and that takes suction from condensate recovery system. This can be a centrifugal pump type or positive displacement type.

Applications of Multi-Stage Boiler Feed Pumps:

• Useful for Irrigation and Power Plant
• Steam Boiler Feeding and High Pressure Testing
• Circulation of Lubrication Oils
• Heating and Air-Conditioning Plants
• Condensate recovery and Hot Water Circulations
• Water Supply to Cooling Towers
• Delicious Castor Oil
• Effluent Treatment Plants
• High Head Delivery

Visit us at: Boiler Feed Pump Manufacturers

Call us at:+91 98453 24047

Email at: info@miecoindia.in

Gear Pumps in Bangalore

Mieco Pumps and Generators Pvt Ltd manufacturers and supplies Hydraulic Gear Pumps in Bangalore. Most of the Gear Pumps can be used in many industrial and commercial applications. Gear Pumps uses the meshing of gears to pump fluids displacement. This is one of the best and commonly using pump for the hydraulic fluid power applications.

In chemical processing installations gear pumps are widely for the high viscosity fluids. 

Two types of Gear Pumps:

1. External Gear Pumps: These Pumps uses two external spur gears.

2. Internal Gear Pumps: These Pumps used external and internal spur gears.

For each revolution,gear pumps has fixed and fluid displacement. Some of the gear pumps are designed to work with gear or motor pumps. 

For more information visit us at: Gear Pumps in Bangalore

High Pressure Water Pumps in Bangalore, India

Mieco India offers High Pressure Water Pumps in Bangalore. High pressure water jet cleaning machines are more suitable for economical industries and it is more powerful and convenient. 

High Pressure Water Pumps are widely used for varieties of applications which require pressure cleaning, pressure testing and these equipment's also required pressurized liquids. Mieco India offers High Pressure Pumps and other different pumps and generators that suits your requirement. These pumps can be offered in die cast aluminum, nickel plated brass heads with ceramic and SS plungers that gives them a very strong life as well as makes them very smart and safe to use.

Facts of comprising hot and cold water high pressure cleaners:

Hot water high pressure cleaners are ideal for removal of contamination's in manufacturing industries such as engineering components, mines, cleaning railway manufacturing components, ship cleanings, earth movers and construction equipment's. These type of pumps can be designed using the latest modern technology for heavy duty work. A clearly arranged control panel with indicator lamps makes pump can run smoothly, safe and eco-friendly. 

Visit us at: High Pressure Pumps Bangalore

Call for expert advice:+91-98453 24047/080-22239173

For any query email at:info@miecoindia.in

Electric Dosing Pumps in Bangalore

Mieco is one of the top brand manufacturer, exporter and supplier of Electric Dosing Pumps in Bangalore.We are enriched with enormous industry experience in the field of supplying and manufacturing vast range electric dosing pumps. The advantage of this design is the elimination of packing's and seals  which are exposed to the liquid being pumped. These feature are more useful when toxic, hazardous and destructive liquids are handled. As per your requirement and needs pumps and generators can be designed for continuous flow. 

Useful support attachment like NRV's, back pressure valves, high pressure gauges, pressure relief valves,suction strainers and low/high speed motorized agitators are also supplied by us. All electric dosing pumps come with storage tanks in DDPE/FRP/SS with moisture/fume sealing devices confirming to international standard safety applications. Mieco Dosing Pumps are high technology based and proven quality solutions to any pumps and generators requirement.

Visit us at: Mieco Pumps and Generators Pvt Ltd

#162, Sadar Patrappa[sp] Road, Bangalore-560 002

Karnataka, India

Mobile: +91 98453 24047

Email: info@miecoindia.in

Generators Dealers in Bangalore- Diesel or Petrol Generators?

MiecoIndia is the best India's Generators Dealers in Bangalore. Generators can be choose depends on your applications. When you choosing a portable generators for your business or construction site, Diesel or Petrol Generators plays a important role for right visitors. While choosing Portable Generators for construction site is the fuel type- diesel or petrol? These includes pros and cons to both. Diesel Generators are more fuel efficient than petrol counter parts. Diesel fuel is more expensive than Petrol Generators .

Petrol Generators emits noxious gases and CO2/litre of fuel, but the diesel is far less volatile than petrol and it is safer in all the situation. Diesel Generators are more popular in all the applications, most of the people used diesel generators this is the reason you will find many of people used large trade generators and run off diesel for their industrial and commercial applications.

Take a time while choosing right pumps and generators that suits all your requirements and needs. Be confident how and where you'll be using generators and what the benefits you getting from generators.

If you need any help from pumps and generators, take a guidance from us or else feel free to contact us while purchasing right portable generators for your project.

Visit us at: http://www.miecoindia.in/

Phone: +91- 9845324047

Email Id: info@miecoindia.in

Types of Portable Generators

Choosing the right generators for your business depends on two major key factors:

1. Type of project you are working on

2. Types of tools you need to power

For large-scale projects, you need a generators with enough grunt to power large, conductive loads such as air compressors, brick saws, pumps, welders and bench saws as well as small hand held power tools. When you working on a construction site, there is no power yet, your generator will also need a power essential appliances tools and lights.

Three types of Portable Generators:

1. Portable Trade Generators:

Portable Trade Generators are designed to move around the construction site. This will provide enough for most of the power tools. A medium sized portable generators with an output of 3 to 4 kVA should be more sufficient for for small to medium sized generators tools such as sanders, hand drills and other small power tools. Larger equipment's includes water pumps, pressure washers and air compressors.

Features, trolley features so it's easy to roll the generators into position without the need for lifting. 

2.

Towable Generators: Towable Generators gives enough power for larger equipment's on a property development or construction site. These generators provide  a power output of more than 10kVA. Heavy duty generators are designed to be hauled or towed behind your van or truck. These larger generators includes long range fuel tanks for uninterrupted use, for different connections multiple outlets and earth leakage protection for increased safety around the site. 

3. Standby Generators:
These generators are designed to provide a site with power in the event of an outage- this is a common occurrence during a construction project, because these are built a power to entire building. Standby Generators are available with outputs starting from 7kVA. Features, remote starting, sound-reduced enclosure and enhanced safety features. 

See more at: http://www.miecoindia.in/

Electric Motors in Bangalore

Electric Motors in Bangalore- Mieco Pumps and Generators offers specially designed products for Electric Motors, DC Motors and its parts, We are one of the best manufacturer, supplier and exporter in Bangalore, India. We provide products at affordable prices and our products are suitable for driving force and perform optimum applications. Our products are made up of as per industry standards and specifications in order to meet our customer requirements. Electric Motors are made by using high quality raw material and it is very efficient and effective in performance. 

Electric Motors are driving force behind any power equipment's, hence have to be the most reliable as well as uneven, so that these products may be used many different duty applications. Mieco Pumps and Generators Pvt Ltd hosted variety of products including electric motors, dc motors, geared motors, energy efficient motors, vertical motors, flange motors and so on. 

For more information visit us at: Mieco Pumps and Generators Pvt Ltd

For any query: info@miecoindia.in

Contact: +91 98453 24047

Boiler Feed Pumps Manufacturers, Suppliers and Exporters

We are a manufacturer, exporter and supplier of Boiler Feed Pumps in Bangalore, India. Boiler Feed Water pumps is used to clean fresh water or steam condensate into a steam boiler. The function of boiler feed pump is delivery water from feed water tank to steam drum , supplies spray water that controls the temperature of super-heater, re-heater and auxiliary steam. Boiler feed water pumps includes high head, low flow pumps. Therefore, multistage pumps is a common choice when you really need boiler feed pumps.

Boiler feed pumps can be designed with 2-stages of pressure.

1. Booster Pump: Booster Pump is one of the best pump and it is very cheap. Booster Pump can be located at the up stream side. It is very risky to get water cavitation when feed water tank get lost of pressure. If the feed water pump can not be located high enough above boiler feed pump to develop a high enough above boiler feed pump to develop a high enough NPSH.
2. Main Pump: It is very expensive and used to injecting cold water into the pump.

Boiler feed pumps controls the steam drum level by using a single element and three elements.

Single Element: Single element controls the steam drum level only when reading changed by discharging control valve. Due to drum pressure or main steam pressure, the rotating speed will not change. Rotating speed of the pump maintains the pump discharge pressure 10 bar above than steam drum pressure.

Three Elements: Three elements controls the level by reading feed water flow, main steam flow and level of steam drum by speed of pump and it adjusted by fluid coupling. Drum pressure and main steam pressure will be increase proportional with the load only when power station is synchronized. This is the right time to change single element control to three element controls by open main discharge and shut discharge control valve. By speed, adjust the flow of the pump and maintains the pump discharge pressure 10 bar above steam drum pressure. 

To know more about our services visit to the below link:

Website: http://www.miecoindia.in/

Phone: +91 98453 24047

Email: info@miecoindia.in

What is irrigation and how water pumps are useful in irrigation?

Irrigation: Irrigation means about providing water to plant roots with th goal to reach high growth rate of agricultural crops. Through fertilizers and chemicals can be additional to an irrigation system. It is quite difficult to irrigate the entire field without water pumps.

At MiecoIndia, you will get all types of agricultural pumps in bangalore and water pumps for irrigation. For a successful irrigation/agriculture – you need to consult the best waterpump dealers in bangalore, as because agriculture depends on the sufficient supplying of water to your fields. In earlier days, the people predicted as that water is an infinite source and it will never finished. But you need to manage the water carefully since we need water to drink and other purposes as well.

Solar Water Pumps:

Each and every solar array has number of solar modules connected in series or parallel. Each solar PV panel convert the solar radiation to electrical energy and generates current.

The electrical energy will be controlled, tuned and directed by the inbuilt controller in DC motor pumps or through the variable frequency driver (VFD) and enables the water pumps and feed to the delivery pipelines.

Water can be drawn from ponds, rivers, borewells or from other sources by the help of solar water pumps in bangalore is pumped to supply water as much as required. It can be stored in tanks where it is channeled to fields to supply from pumps with drip irrigation system to provide water directly to the fields.

Visit us at: http://www.miecoindia.in/

Hydraulic Gear Pump Manufacturers in Bangalore

MiecoIndia has established the leading hydraulic gear pump manufacturers in Bangalore. Our equipments are widely demanded and appreciated for their quality based products, efficiency, durability, cost effectiveness and consistent performance. Our continuous analysis and developement team that helps us be aware of latest developments that is associated with the design and construction of the offered products.

We can combine many industrial pumps and generators in Bangalore, to simulate your predictable vibration testing conditions- gas vibration testing, mechanical vibration and hydraulic evoked vibration testing that combined with numerous atmospheric or climatic conditions.

For more details visit us at: Hydraulic Gear Pump Manufacturers in Bangalore

Electric Water Pumps in Bangalore

MiecoIndia is more dedicated supplier of Electric Water Pumps in Bangalore. When it comes to dealing with a pumps and generators flooding problem it is not enough to have the very best pumping equipment system at your disposal. Our experts has extensive experience and here at MiecoIndia we have been operating manufacturing unit from last thirty years. We pride ourselves on the depth of our knowledge on this domain. This is the reason we believe in offering the best pump and generators service all over the India.

By utilising our extensive professional experience we are well placed to know exactly about our product fuctions. We have wide range pumps and generators equipments on hand to deliver effective results including boiler feed pumps, sewage pumps, chemical processing pumps, engine driven pumps, magnetic driven pumps and electric motors. We provide our services efficiently and quickly, covering when you need it most. Here at MiecoIndia you will find all types of effective and efficient pumps in Bangalore surrounding areas.

The main concern about electric water pumps, it draws less horse power through the increased drag on the alternator than the conventional water pumps. This will happen through the engine driven belt. Drag is required to translates into horsepower to operate the pump and it decreases the fuel economy and performance. Many of the water pumps are driven by the timing belt and it is located under the timing belt cover.

If you would like to find out more about our pumps and generators services, get in touch with our team on +91- 9845324047

http://www.miecoindia.in/

Email Id: info@miecoindia.in

Magnetic Driven Pumps in Bangalore

MiecoIndia offering Magnetic Driven Pumps in Bangalore, India. We have been more concentrating on making rapid progress towards implementing the pumps and generators center and also a dealer center for all aspects of pumping solutions, through out the India. Magnetic Driven Pumps are originally designed to pump oxic and other critical fluids without a use of mechanical seals. Our aim is to deliver high quality pumps and generators to maximize customer satisfaction in the best possible manner.

Magnetic Driven Pumps doesn't require renewable gland packings, shaft sleeve or mechanical renders. These pumps more suitable and economical other than any conventional glad packed or sealed pump. Leakage problem is totally ingored by magnetic drive. All our products are manufactured using best high quality components, so that our products suits international quality standards.

Magnetic Driven Pumps comes in variey of designs, suitable for all the commercial and industrial applications requiring corrosion resistant pumps. Magnetic Driven Pump Designs meets wide range of functions from compact configurations to large chemical process pump series.

If you have any questions about Magnetic Driven Pumps, don't hesitate to reach out the MiecoIndia Pumps and Generators Pvt Ltd for more information. For any technical help visit to the site: http://www.miecoindia.in/

Water Pumps in Bangalore

MiecoIndia is one of the best Water Pumps suppliers in Bangalore, India. Water Pumps includes Mechanical Water Pumps, Electric Water Pumps, Electric Dosing Pump, Chemical Processing Pump, Boiler Feed Pumps and so on.

• 
  Mechanical Water Pumps: Mechanical Water Pumps will always go to the medium for cooling an automotive engine. The coolant flow varies, with that keep in mind, the manufacturer of the pump has designed the pumps impeller, so that it will offer sufficient flow at an idle.

• 
  Engine-Driven Water Pumps: These are very simple and more reliable. When used on rear wheel drive vehicle, conventional water pumps provide the mounting point for a mechanically operated cooling fan. The longevity of Mechanical and Engine-Driven water pumps is reliant on properly maintaining the cooling system and keeping it free from contamination.

• Electric Water Pumps: These pumps are offered street use with coolant flow rates from 20 GPM to 35 GPM. When we used for engine cooling only, they have ability to give good performance. These pumps can only be used on exemplary rear wheel drive vehicles and it also require a complex wiring circuit board used to activate and deactivate the water pump at the permitted times. We offered in a remote version or block mounted version, used to supply water to the heater core.

If you have any questions about Pumps and Generators, don't hesitate to reach out the MiecoIndia Pumps and Generators Pvt Ltd for more information. When you want to buy Water Pumps, take a helpful technical information at http://www.miecoindia.in/